Chiptuning BMW (E38) 740d 180W/245hp

instead ~~399,00 EUR~~
only 269,00 EUR

incl. 19 % Tax excl. Shipping costs

Product No.: m6.cbj09

Details
Fitting
Mileage
Function

Performance increase

	Standard	MSC5
max. power	180 kW / 245 hp	210 kW / 285 hp
max. torque	540 Nm	620 Nm

More power and torque

MSC6 is a piggyback electronic device for chiptuning. By utilising the tolerances given by the vehicle manufacturer this optimisation enables a performance and torque increase of up to 20% for your engine.

Better fuel consumption Bis zu 15% weniger Kraftstoffverbrauch

Noticeably more power at low rpm and an improved degree of efficiency improve the fuel consumption by up to 15%. That's how the tuning pays back!

Easy do-it-yourself fitting Einfache Montage in wenigen Minuten

Custom made looms in OEM-quality with original connectors enable do-it-yourself fitting within a short time! A traceless refitting back to original conditions is possible at any time.

30-days money-back guarantee

Buy without risk! If you are not satisfied with our product, for whatever reason, you can send the product back within 30 days. We will refund your money immediately.

Simple and fast fitting

Custom made looms in OEM-quality with original connectors enable a fitting within a short time!

Since no mechanical interference takes place, the MSC6-powermodule can be easily installed also by yourself. Alternatively, we recommend the fitting in your trusted workshop.

Easy fitting in 4 steps:


1. Disconnect the original connector from the rail pressure sensor.	2. Now connect the supplied MSC6-loom to the rail pressure sensor.


3. Connect the original sensor´s connector to the MSC6-loom.	4. Connect the loom to the MSC6-powermodule and lock it. Done!

Removable without any trace

The refitting back to the original condition is as easy as the fitting. After the removal of the MSC6-powermodule, the vehicle is again in original state and the performance increase is not traceable anymore.

30-days money-back guarantee

Buy without risk! If you are not satisfied with our product, for whatever reason, you can send the product back within 30 days. We will refund your money immediately.

Technical background

MSC means Mapped Signal Controller – a signal processor that we have developed and which is produced in 6th hardware generation meanwhile.

The MSC is a piggyback electronic device for chiptuning. To increase the performance the microprocessor monitors the signals of the engine control unit and changes them if necessary. By utilising the tolerances given by the vehicle manufacturer this optimisation enables a performance and torque increase of up to 20% for your engine.

MSC-powermodules, which are connected to sensors (here: rail pressure sensor on commonrail engines) monitor the output signal of the sensor and forward it depending upon engine conditions modified or unmodified to the engine control unit. This way a higher fuel pressure raises the amount of fuel injected at certain load conditions to increase the engine performance.

This performance increase utilises the fact that all Commonrail diesel are run under excess of air. The amount of fuel injected precisely increases without exceeding the absorption limit. That's how the exhaust gas stays soot free and also in combination with diesel particulate filter the regeneration intervals don't get shortened.

We realise a performance increase that represents the best compromise between driving fun, engine durability and exhaust gas emission laws.

30-days money-back guarantee

Buy without risk! If you are not satisfied with our product, for whatever reason, you can send the product back within 30 days. We will refund your money immediately.

More power - better mileage!

The MSC-powermodule also improves the thermodynamic efficiency of your engine. At the same time, it implies also a reduced specific fuel consumption.

The performance increase enables driving in a higher gear at low engine speeds. This works on vehicles with manual and automatic transmission aswell.

The combination of an improved improved efficiency and lower engine speeds reduces the fuel consumption by up to 15%. So the costs for this performance increase can be recouped very quickly by fuel saving.

Your savings with 15% improved mileage
at a rate of 1,15 Euro per litre Diesel

	20.000 km p.a.	40.000 km p.a.	60.000 km p.a.
6 litre / 100 km	207.- Euro	414.- Euro	621.- Euro
7 litre / 100 km	241.- Euro	483.- Euro	724.- Euro
8 litre / 100 km	276.- Euro	552.- Euro	828.- Euro
9 litre / 100 km	310.- Euro	621.- Euro	931.- Euro
10 litre / 100 km	345.- Euro	690.- Euro	1035.- Euro

"With this performance increase overtaking is more relaxed and the improved fuel consumption makes some extra money."

Frank Pätzold, Nürnberg

Chiptuning

Informations

Chiptuning BMW (E38) 740d 180W/245hp

Do you have any questions?

+49 (0)9105 9043

CEO Alexander Wenning

More about...

Last viewed:

Search:

Advanced search